Anodizing Specifications

SPECIFICATION	PROCESS
TYPE III – MIL A 8625F	ENGINEERED HARDCOAT
TYPE III – CLASS I	ENGINEERED HARDCOAT – NON DYED 2 THOUSANDTHS OF AN INCH +/- TWO TENTHS OF A THOU- NON DYED
TYPE III – CLASS II	ENGINEERED HARDCOAT – DYED SPECIAL ORDER – NOT NORMALLY DONE
TYPE II – MIL A 8625F	STANDARD (SULFURIC ACID) ANODIZING
TYPE II – CLASS I	STANDARD ANODIZING – NON DYED/CLEAR
TYPE II – CLASS II	STANDARD ANODIZING – DYED/COLOURED NOTE: COLOUR MUST BE SPECIFIED BY CUSTOMER
TYPE II – CLASS I (.0012″)	HARD ANODIZING 1.2 THOUSANDTHS OF AN INCH +/- TWO TENTHS OF A THOU
TYPE II – CLASS I MARINE APPLICATION MIL A 8625F	HARD ANODIZING 1.2 THOUSANDTHS OF AN INCH +/- TWO TENTHS OF A THOU
AMS 2471	TYPE II – CLASS I ANODIZING
AMS 2472	TYPE II – CLASS II ANODIZING
AMS 2468	TYPE III – CLASS I ANODIZING
AMS 2469	TYPE III – CLASS II ANODIZING
AG	GOLD
ALODINING	CHROMATE
#300	BRONZE

NOTE: we do not do Type I anodizing which is chromic acid anodizing

ANODIC COATING THICKNESS FOR TYPICAL TYPE II – CLASS I AND II RANGES FROM TWO TENTHS OF A THOU. TO 1 THOU. AND HARD ANODIZING IS 1.2 THOU. TO 1.4 THOU ON AVERAGE.

Anodizing