Anodizing Specifications

SPECIFICATION

PROCESS

TYPE III – MIL A 8625F ENGINEERED HARDCOAT
TYPE III – CLASS I ENGINEERED HARDCOAT – NON DYED
2 THOUSANDTHS OF AN INCH +/- TWO TENTHS OF A THOU- NON DYED
TYPE III – CLASS II ENGINEERED HARDCOAT – DYED
SPECIAL ORDER – NOT NORMALLY DONE
TYPE II – MIL A 8625F STANDARD (SULFURIC ACID) ANODIZING
TYPE II – CLASS I STANDARD ANODIZING – NON DYED/CLEAR
TYPE II – CLASS II STANDARD ANODIZING – DYED/COLOURED
NOTE: COLOUR MUST BE SPECIFIED BY CUSTOMER
TYPE II – CLASS I (.0012″) HARD ANODIZING
1.2 THOUSANDTHS OF AN INCH +/- TWO TENTHS OF A THOU
TYPE II – CLASS I
MARINE APPLICATION
MIL A 8625F
HARD ANODIZING
1.2 THOUSANDTHS OF AN INCH +/- TWO TENTHS OF A THOU
AMS 2471 TYPE II – CLASS I ANODIZING
AMS 2472 TYPE II – CLASS II ANODIZING
AMS 2468 TYPE III – CLASS I ANODIZING
AMS 2469 TYPE III – CLASS II ANODIZING
AG GOLD
ALODINING CHROMATE
#300 BRONZE

NOTE: we do not do Type I anodizing which is chromic acid anodizing

ANODIC COATING THICKNESS FOR TYPICAL TYPE II – CLASS I AND II RANGES FROM TWO TENTHS OF A THOU. TO 1 THOU. AND HARD ANODIZING IS 1.2 THOU. TO 1.4 THOU ON AVERAGE.

Comments are closed.

  •